A yau, ana iya samun allon allon bugawa a cikin nau’ikan samfuran lantarki daban -daban, daga kwamfutocin da kuke amfani da su zuwa wayoyi, kyamarori, da sauransu. They are a standard part of everyday life, even if most people don’t think about them or see them often. Su ne ɓoyayyen “cibiyar jijiya” don yawancin abubuwan da muke amfani da su.

A da, PCBS sun fi sauƙi. Amma sabbin ci gaba da aka samu a fasaha sun ba da damar ƙirƙirar katako mai rikitarwa wanda ke yin fiye da yadda suke yi. PCBS-Layer masu yawa suna taimakawa wajen ƙirƙirar ƙarin kayan lantarki.

PCB mai Rarrabawa

Ana la’akari da PCB da yawa idan yana da yadudduka uku ko fiye na farantin jan ƙarfe. Waɗannan yadudduka sune allon da’irar da aka shimfiɗa ɓangarorinsa sannan aka manne su. Sun kuma haɗa da ruɓaɓɓen rufi tsakanin yadudduka don taimakawa kare farantin daga zafi. Haɗin lantarki tsakanin yadudduka yana faruwa ta cikin ramuka. Waɗannan na iya zama ramukan makafi, ramukan da aka binne ko electrodeposits tare da ramuka a cikin farantin. This allows for more connections and the manufacture of complex printed circuit boards.

Yayin da buƙatar ƙarin lantarki mai rikitarwa ke ƙaruwa, PCBS mai ɗimbin yawa ya zama mai mahimmanci. Daidaitaccen PCBS ba zai iya biyan buƙatun sabbin kayan lantarki ba saboda ɓarna mai ƙarfi, ƙyalli, da matsalolin amo. PCBS mai ɗimbin yawa zai iya taimakawa magance waɗannan matsalolin. Adadin yadudduka da aka yi amfani da su akan waɗannan allon zai bambanta. Yawanci, aikace -aikacen yana buƙatar yadudduka huɗu zuwa takwas, amma wannan ya dogara da dalilai da yawa.

Me yasa za a zabi PCB mai yawa?

Waɗannan nau’ikan PCBS suna da fa’idodi da yawa. Ofaya daga cikin dalilan gama gari don amfani da PCBS mai yawa shine girman. Saboda ƙirar da aka shimfiɗa, wannan yana nufin PCB zai zama mafi ƙanƙanta fiye da sauran allunan da aka buga, amma har yanzu suna da matakin aiki iri ɗaya. Today, most people want their gadgets to be smaller and more powerful. Multilayer PCBS na iya yin wannan. Waɗannan nau’ikan allon kuma suna yin ƙarancin nauyi, wanda ke taimakawa rage girman nauyin na’urorin da ke amfani da su. Amma girman, ba shakka, ba shine kawai fa’ida ba.

Yawancin lokaci, waɗannan allon kuma za su kasance masu inganci kuma abin dogaro. The design of circuit boards requires a lot of work to make sure they work properly. When combined with quality materials and structures, they last. An san su da taɓarɓarewa da dorewa, babban ɓangaren abin shine rufi tsakanin faranti.

The connections on these boards are tighter than on standard PCBS. Wannan yana nufin sun kasance masu haɗin kai da ƙarfi. Za su sami ƙarin ƙarfin aiki da saurin sauri. Multilayer PCBS suma suna da maƙasudi guda ɗaya kawai. Wannan yana taimakawa cikin ƙirar samfurin ƙarshe wanda zai yi amfani da su. Wannan yana nufin cewa samfurin yana buƙatar samun maƙasudin shiga guda ɗaya kawai. Wannan yana ba da ƙarin ‘yancin ƙira don waɗannan na’urori.

Waɗannan su ne manyan fa’idodin PCBS masu fa’ida da yawa. Idan ba ku yi tunanin yin amfani da shi don ƙirar ku ta gaba ba, yana iya zama lokacin ku.

Aikace -aikace masu amfani na PCBS masu yawa

Because of these advantages, these types of boards are often considered the preferred type of printed circuit board. Misali, ana samun su a cikin nau’ikan kayan lantarki daban -daban. Ana iya amfani da su akan wayoyin komai da ruwanka, Allunan, microwaves, smartwatches, kwamfutoci da ƙari.

Hakanan ana amfani da Multipleer PCBS a masana’antar sadarwa. They are commonly used for satellites, signal transmissions, GPS and cell towers. Ana amfani da su a cikin tsarin sarrafa masana’antu da yawa da kuma masana’antar kera motoci. Motoci da yawa a yau sun dogara da fasahar kwamfuta sosai. Waɗannan allon suna ba da damar amfani da na’urori masu rikitarwa a cikin ƙananan wurare.

Waɗannan allon kuma sun zama ruwan dare gama gari a cikin kayan lantarki don masana’antar likitanci. Ana amfani da su a cikin nau’ikan na’urori daban -daban don taimakawa ganowa da kula da marasa lafiya. Ana iya samun PCBS na Multilayer a cikin masu lura da zuciya, na’urorin binciken CAT da sauran na’urori da yawa. Ayyukansa, dorewarsa, ƙaramin girmansa da ƙarancin nauyi shima yana sa ya zama madaidaicin mafita don aikace -aikacen sojoji da sararin samaniya da yawa.

Kamar yadda kuke gani, PCBS mai ɗimbin yawa shine mafita ga kusan kowane nau’in masana’antu a yau. Waɗannan su ne kawai ‘yan hanyoyi daban -daban da zaku iya amfani da su. Babu wata babbar illa ga amfani da irin waɗannan allon. Ko da yana iya haɓaka lokutan samarwa, ana iya rage wannan ta hanyar nemo sanannun kamfanoni tare da gajeren lokutan juyawa.