LED PCB boto theknoloji e ntshetswa pele ka popontshwa le lecha le lecha la sehlahisoa. Mohlala o motle ke nts’etsopele ea PCBS bakeng sa mabone a LED. The LED is welded to the circuit board, and the chip produces light during the electrical connection. Sesepa sa mocheso le setsi sa ceramic li sebelisoa ho hokela chip ho monya mocheso le ho pholisa ts’ebetso.

Li-panels tsa LED tsa PCB li tloaetse ho hlahisa mocheso o mongata, o etsang hore ho futhumetse ka mekhoa e tloaelehileng ho be boima. Ka hona, hangata khetha boto ea potoloho ea kelello ea Core Core ho ntlafatsa bokhoni ba mocheso ba mocheso. Ka ho khetheha, aluminium e tloaetse ho sebelisoa ho etsa mapolanka a potoloho bakeng sa mabone a LED. Aluminum PCBS typically include a thin layer of thermally conductive dielectric material that relocates and dissolves heat, providing excellent coherence compared to unyielding PCBS.

PCB LED kopo

Lisebelisoa tsa LED tsa PCB li ka kenyelletsoa lits’ebetsong tse ngata tsa mabone ka lebaka la ts’ebetso ea tsona e ntle ea matla, theko e tlase le ho fetoha habonolo ha moralo, joalo ka:

Leseli la sephethephethe

Mabone a koloi

Mabone a sesole

Street tunnel lighting

Tsela ea boema-fofane

Street lamp lighting

Photovoltaic (letsatsi) mabone

Mabone a marang-rang le mabone

Lights in a hospital operating room

Factory lighting and so on

RayMing e fana ka tharollo e sebetsang ebile e theko e tlaase ea mabone a LED

As a solution for LED circuit boards with more than ten years of experience, we are able to provide the production of LED circuit boards, sourcing and assembling components under one roof. Re thabela ho sebetsa le uena ho nts’etsapele liboto tsa aluminium / tšepe tse ikhethileng bakeng sa ts’ebeliso ea hau e ikhethang. We offer affordable standard FR-4 boards with thermal-aluminium coatings that efficiently dissipate heat, cool all LED circuit components and significantly improve product performance.

Ke eng e kentsoeng LED PCB le hore na e sebetsa joang?

Leds e emela li-diode tse hlahisang khanya (leds). Ke li-diode tsa semiconductor mme ke tsa sehlopha sa lebone la electroluminescent, se hlahisang leseli ka ho kopanya bocha lipara tse tsamaisang litefiso ho semiconductors tse nang le lekhalo le loketseng la band. Due to their low voltage, operating power, compact size, long life and stability, leds are used in both industrial and consumer markets. E ‘ngoe ea likarolo tsa eona tse hohelang ke bokhoni ba eona ba ho hlahisa leseli ntle le ho hlahisa mocheso o mongata, ho o etsa hore o bolokehe ts’ebelisong ea letsatsi le letsatsi. Its functionality is the main reason leds are integrated into printed circuit boards (PCBS). Leds lia tšepahala ebile li sebetsa hantle bakeng sa lits’ebetso tsa PCB. Li sebetsa joalo ka leseli, haholoholo liphetohong tsa lifilimi tse sa sebetsaneng. Liboto tsa LED tse kopaneng li sebelisoa hangata bakeng sa lits’oants’o tsa polyester le li-keyboards tsa rabara.

Sebopeho sa mosebedisi

Circuit boards are usually used for the lower circuitry of membrane switches, especially since they provide it. Display LED display window. These are usually easy to integrate into printed circuit board switch designs, but there are some choices about which type of LED to use.

Single point and block LEDS

They do the most and work the best of almost any type of surface material. Note that matte or textured surfaces are best used for greater light diffusion. It is also important to remember that although leds cannot touch the active area of the switch, they can be made to believe they are part of the switch by graphical manipulation.

Integrated or surface-mounted single point LED

Li-LEDS tse kopaneng kapa tse hlahelletseng li ka ts’oaroa ka lesale le tlase. Bakeng sa mefuta ena ea li-leds, ho ka sebelisoa mebala e fapaneng, ho kenyeletsoa le li-leds tsa mebala e ‘meli. When the graphics layer is shaped to receive the LED, it is easy to terminate termination from the same end of the connector. Hlokomela hore ha ho hlokahale hore u boloke chate ea ho phethela LED ka lehare le arohaneng.

Menyetla ya setshehetso sa LED PCB

Ha likarolo tsa elektroniki li ntse li fokola, ts’ebeliso ea li-switch tsa LED li molemo hobane li lumella ho tsamaisoa ha lihlahisoa habonolo le kopano ea hoqetela. Likarete tsena tsa LED tse kopaneng li loketse hantle bakeng sa mabone a tlase, moreki, lisebelisoa, lisebelisoa tsa bongaka, leseli ho indasteri e mahareng le lits’ebetso tse ling tsa Marine le Aerospace. Ho sa tsotelehe ts’ebeliso, melemo ea liboto tsa LED tse kopaneng e mengata:

E bobebe ebile e sa bonahale

Sesebelisoa sa theko e tlase sa backlit

Hanela lerōle le mongobo

Ho bonolo ho kenyelletsa lipapali tse rarahaneng tsa li-interface

Tšebeliso e tlase ea matla

E fumaneha ka mebala e fapaneng, boholo le matla

E ka sebelisoa bakeng sa sesebelisoa sa filimi ea silevera se feto-fetohang le sesebelisoa sa filimi ea koporo e tenyetsehang

Haeba li-led li kopantsoe le boto ea potoloho, ho bonolo ho kopanya li-switch tsa filimi tse tšesaane le li-keyboards, li-skrini le li-switch tsa mefuta e meng. Built-in or embedded LED PCBS provide greater design freedom even when creating complex backlit switch components. Botenya bo bonyenyane ba li-switch tsa filimi tse tšesaane tsa LED bo fokotsa sebaka se felletseng sa likarolo tsena tse rarahaneng tsa switch. Designers and engineers often choose integrated LED PCBS when inspecting and updating products.

Ka kakaretso, li-PCBS tsa LED li fana ka khanya ea morao-rao e sebelisang mosebelisi bakeng sa li-switch tsa filimi e tšesaane. Ka linako tse ling ke khetho e ntle ea ho bonesa li-ICONS tse nyane le matšoao hobane mabone a ts’oanang a ICONS le matšoao a nang le lisekete tsa LED tse kentsoeng ha ho bonolo ho li fihlela.