A halin yanzu, a masana’antar sarrafa kayan lantarki, Kwamitin PCB ba makawa a matsayin ɗaya daga cikin mahimman abubuwan lantarki. A halin yanzu, hukumar PCB tana da nau’ikan iri daban -daban, kamar babban allon PCB mai tsayi, allon PCB na microwave da sauran nau’ikan allon PCB ya riga ya yi wani suna a kasuwar siyarwa. Masu kera PCB suna da dabarun sarrafawa na musamman don nau’ikan allon PCB. Amma gabaɗaya, dole ne a yi la’akari da samarwa da sarrafa hukumar PCB matakai biyu ko uku.

1. Yi la’akari da zaɓin farantin

Za’a iya raba mabuɗin allon PCB zuwa kayan albarkatun sunadarai da kayan inorganic iri biyu, kowane albarkatun ƙasa galibi yana da fa’idodi na musamman. Sabili da haka, tabbataccen nau’in farantin yana la’akari da kaddarorin dielectric, nau’ikan foil na jan ƙarfe, kaurin gindin tushe, da halayen samarwa da sarrafawa. Daga cikinsu, kaurin murfin murfin jan ƙarfe shine yanayin farko don cutar da halayen allon PCB da aka buga. Gabaɗaya, mafi girman kauri, don tsarin etching mai dacewa da haɓaka ƙirar babban madaidaici yana da fa’idodi.

2. Yi la’akari da saitin tsarin samarwa

Yanayin yanayi na samar da katako na katako na PCB yana da matukar mahimmanci, kuma sarrafa zafin aiki da ɗimbin iska na iska abubuwa ne masu mahimmanci musamman. Idan canjin zafin aiki yana bayyane sosai, yana iya sa ramin juyawa akan farantin ya karye. Idan yanayin zafi na iska ya yi yawa, ƙarfin samar da makamashin nukiliya yana da mummunan lahani ga halayen farantin tare da ƙarfin littafi mai ƙarfi, galibi ana nuna shi a matakin aikin dielectric. Sabili da haka, ya zama dole a kula da matsakaitan ƙa’idodin muhallin halitta a cikin samarwa da masana’antu na PCB.

3. Yi la’akari da zaɓin tsarin samarwa

Manufar PCB abu ne mai sauqi don saduwa da cutar da abubuwa iri -iri, samarwa da sarrafa lambar lamba, fasahar sarrafa rami, maganin murfin farfajiya da sauran hanyoyin samarwa zasu haifar da cutar da ingancin hukumar PCB. Sabili da haka, la’akari da yanayin yanayi na wannan tsarin samarwa, samar da aikin PCB da sarrafa shi tare da halayen kera injina da kayan aiki, ana iya daidaita shi gwargwadon nau’in allon PCB da buƙatun samarwa da sarrafawa.

Daga hagu da dama, zaɓin hukumar PCB, saita tsarin samarwa da zaɓin tsarin samarwa dole ne a yi la’akari da su a cikin samarwa da sarrafa hukumar PCB. Bugu da ƙari, kayan aikin katako na PCB da hanyar buɗewa matakin ne wanda dole ne a zaɓi shi a hankali, wanda ke da alaƙa da ƙyallen farantin samfuran da aka gama na hukumar buga fakitin wutar lantarki.