1. Ní mór é a phacáil i bhfolús

2. Líon na PCB bord per stack is limited according to the size is too small

3. Sonraíochtaí docht gach cruachta de sciath scannáin Corpoideachais agus na rialacháin maidir le leithead an chorrlaigh

4. Ceanglais shonraíochta maidir le scannán Corpoideachais agus Bileog Boilgeog Aeir

5. Sonraíochtaí meáchain cartáin agus eile

6. An bhfuil aon rialacháin speisialta ann maidir le maolánú sula gcuirtear an bord taobh istigh den chartán?

7. Sonraíochtaí ráta frithsheasmhachta tar éis séalaithe

8. Tá meáchan gach bosca teoranta

Faoi láthair, tá an pacáistiú craiceann folúis baile cosúil, níl sa phríomhdhifríocht ach an limistéar oibre éifeachtach agus méid an uathoibrithe.

Réamhchúraimí:

a. Faisnéis a chaithfear a scríobh lasmuigh den bhosca, mar shampla “ceann cruithneachta béil”, uimhir ábhair (P / N), leagan, tréimhse, cainníocht, faisnéis thábhachtach, srl. Agus na focail Déanta i Taiwan (más onnmhairiú iad).

b. Ceangail teastais cháilíochta ábhartha, mar shampla slisní, tuarascálacha táthaitheachta, taifid tástála, agus roinnt tuarascálacha tástála a theastaíonn ó chustaiméirí éagsúla, agus cuir iad ar an mbealach a shonraíonn an custaiméir. Ní ceist na hollscoile í an phacáistiú. Sábhálfaidh sé go leor trioblóide mura ndéanfaidh tú é le do chroí.

The circuit board is no better than other products, and it cannot be in contact with air and water. First of all, the PCB board cannot be damaged by vacuum. A layer of bubble film must be placed on the side of the box when packing. The bubble film has better water absorption, which plays a very good role in preventing moisture. Of course, moisture-proof beads are also indispensable. Then sort them and place them on labels. After sealing, the box must be stored in a dry and ventilated place with partition walls and off the ground, and avoid sunlight. The temperature of the warehouse is best controlled at 23±3℃, 55±10%RH. Under such conditions, PCB boards with surface treatments such as immersion gold, electro-gold, spray tin, and silver plating can generally be stored for 6 months. 3 PCB boards with surface treatment such as tin sink and OSP can generally be stored.