1. 必须真空包装

2.数量 PCB板 per stack is limited according to the size is too small

3、每叠PE薄膜涂层的松紧度规格及边距宽度规定

4、PE薄膜和气泡片的规格要求

5.纸箱重量规格及其他

6. 将板子放入纸箱前是否有特殊的缓冲规定？

7、封口后电阻率规格

8.每箱重量有限制

目前国内真空贴体包装大同小异，主要区别仅在于有效工作面积和自动化程度。

注意事项：

一种。 必须写在盒子外的信息，如“口服麦头”、材料编号（P/N）、版本、时期、数量、重要信息等。以及台湾制造（如果出口）的字样。

湾附上相关质量证明，如切片、可焊性报告、检测记录，以及各种客户要求的一些检测报告，按客户指定的方式放置。 包装不是大学的问题。 用心去做会省去很多不该发生的麻烦。

The circuit board is no better than other products, and it cannot be in contact with air and water. First of all, the PCB board cannot be damaged by vacuum. A layer of bubble film must be placed on the side of the box when packing. The bubble film has better water absorption, which plays a very good role in preventing moisture. Of course, moisture-proof beads are also indispensable. Then sort them and place them on labels. After sealing, the box must be stored in a dry and ventilated place with partition walls and off the ground, and avoid sunlight. The temperature of the warehouse is best controlled at 23±3℃, 55±10%RH. Under such conditions, PCB boards with surface treatments such as immersion gold, electro-gold, spray tin, and silver plating can generally be stored for 6 months. 3 PCB boards with surface treatment such as tin sink and OSP can generally be stored.