1. Rhaid ei bacio dan wactod

2. Nifer y Bwrdd PCB per stack is limited according to the size is too small

3. Manylebau tynnrwydd pob pentwr o orchudd ffilm AG a rheoliadau lled yr ymyl

4. Gofynion manyleb ar gyfer ffilm AG a Thaflen Swigen Aer

5. Manylebau pwysau carton ac eraill

6. A oes unrhyw reoliadau arbennig ar gyfer byffro cyn gosod y bwrdd y tu mewn i’r carton?

7. Manylebau cyfradd gwrthsefyll ar ôl selio

8. Mae pwysau pob blwch yn gyfyngedig

Ar hyn o bryd, mae’r deunydd pacio croen gwactod domestig yn debyg, y prif wahaniaeth yn unig yw’r ardal weithio effeithiol a graddfa’r awtomeiddio.

Rhagofalon:

a. Gwybodaeth y mae’n rhaid ei hysgrifennu y tu allan i’r bocs, fel “pen gwenith llafar”, rhif deunydd (P / N), fersiwn, cyfnod, maint, gwybodaeth bwysig, ac ati. A’r geiriau Made in Taiwan (os yw’n cael ei allforio).

b. Atodwch dystysgrifau ansawdd perthnasol, megis sleisys, adroddiadau weldio, cofnodion profion, a rhai adroddiadau prawf sy’n ofynnol gan amrywiol gwsmeriaid, a’u rhoi yn y ffordd a bennir gan y cwsmer. Nid cwestiwn o’r brifysgol yw pecynnu. Bydd ei wneud â’ch calon yn arbed llawer o drafferth na ddylai ddigwydd.

The circuit board is no better than other products, and it cannot be in contact with air and water. First of all, the PCB board cannot be damaged by vacuum. A layer of bubble film must be placed on the side of the box when packing. The bubble film has better water absorption, which plays a very good role in preventing moisture. Of course, moisture-proof beads are also indispensable. Then sort them and place them on labels. After sealing, the box must be stored in a dry and ventilated place with partition walls and off the ground, and avoid sunlight. The temperature of the warehouse is best controlled at 23±3℃, 55±10%RH. Under such conditions, PCB boards with surface treatments such as immersion gold, electro-gold, spray tin, and silver plating can generally be stored for 6 months. 3 PCB boards with surface treatment such as tin sink and OSP can generally be stored.