1. Għandu jkun ippakkjat bil-vakwu

2. The number of Bord tal-PCB per stack is limited according to the size is too small

3. L-ispeċifikazzjonijiet tal-issikkar ta ‘kull munzell ta’ kisi tal-film PE u r-regolamenti tal-wisa ‘marġini

4. Rekwiżiti ta ‘speċifikazzjoni għal film PE u Folja tal-Bużżieqa ta’ l-Ajru

5. Speċifikazzjonijiet tal-piż tal-kartun u oħrajn

6. Hemm xi regolamenti speċjali għall-buffering qabel ma tpoġġi l-bord ġewwa l-kartuna?

7. Speċifikazzjonijiet tar-rata ta ‘reżistenza wara s-siġillar

8. Il-piż ta ‘kull kaxxa huwa limitat

Fil-preżent, l-ippakkjar domestiku tal-ġilda bil-vakwu huwa simili, id-differenza ewlenija hija biss iż-żona effettiva tax-xogħol u l-grad ta ‘awtomazzjoni.

Prekawzjonijiet:

a. Informazzjoni li trid tinkiteb barra l-kaxxa, bħal “ras tal-qamħ orali”, numru tal-materjal (P/N), verżjoni, perjodu, kwantità, informazzjoni importanti, eċċ. U l-kliem Made in Taiwan (jekk l-esportazzjoni).

b. Waħħal ċertifikati ta ‘kwalità rilevanti, bħal flieli, rapporti ta’ weldjabbiltà, rekords tat-test, u xi rapporti tat-test meħtieġa minn diversi klijenti, u poġġihom bil-mod speċifikat mill-klijent. L-ippakkjar mhuwiex kwistjoni tal-università. Li tagħmel dan b’qalbek se tiffranka ħafna inkwiet li m’għandux iseħħ.

The circuit board is no better than other products, and it cannot be in contact with air and water. First of all, the PCB board cannot be damaged by vacuum. A layer of bubble film must be placed on the side of the box when packing. The bubble film has better water absorption, which plays a very good role in preventing moisture. Of course, moisture-proof beads are also indispensable. Then sort them and place them on labels. After sealing, the box must be stored in a dry and ventilated place with partition walls and off the ground, and avoid sunlight. The temperature of the warehouse is best controlled at 23±3℃, 55±10%RH. Under such conditions, PCB boards with surface treatments such as immersion gold, electro-gold, spray tin, and silver plating can generally be stored for 6 months. 3 PCB boards with surface treatment such as tin sink and OSP can generally be stored.