1. Pono e hoʻopaʻa ʻia i ka ʻōpala

2. The number of Papa PCB per stack is limited according to the size is too small

3. ʻO nā kikoʻī o ka paʻa o kēlā me kēia pūʻulu o ka uhi kiʻiʻoniʻoni PE a me nā hoʻoponopono o ka laulā ākea.

4. Nā koi kikoʻī no ka kiʻiʻoniʻoni PE a me ka Air Bubble Pepa

5. Nā kikoʻī kaumaha Carton a me nā mea ʻē aʻe

6. Aia kekahi mau lula kūikawā no ka pale ʻana ma mua o ka waiho ʻana i ka papa i loko o ka pahu pahu?

7. Nā kiko’ī helu kū’ē ma hope o ka silaʻana

8. Ua kaupalena ʻia ke kaumaha o kēlā me kēia pahu

I kēia manawa, ua like ka ʻili ʻili o ka home, ʻo ka ʻokoʻa nui wale nō ka wahi hana kūpono a me ke ʻano o ka automation.

Nā kūkākana:

a. ʻIke pono e kākau ʻia ma waho o ka pahu, e like me ka “poʻo palaoa waha”, helu waiwai (P/N), mana, manawa, nui, ʻike koʻikoʻi, etc.

b. E hoʻopili i nā palapala hōʻoia kūpono, e like me nā ʻāpana, nā hōʻike weldability, nā moʻolelo hoʻāʻo, a me kekahi mau hōʻike hoʻāʻo e koi ʻia e nā mea kūʻai aku, a kau iā lākou ma ke ala i kuhikuhi ʻia e ka mea kūʻai. ʻAʻole ʻo Packaging kahi nīnau o ke kulanui. ʻO ka hana ʻana me kou puʻuwai e hoʻopakele i nā pilikia he nui ʻaʻole pono e hana.

The circuit board is no better than other products, and it cannot be in contact with air and water. First of all, the PCB board cannot be damaged by vacuum. A layer of bubble film must be placed on the side of the box when packing. The bubble film has better water absorption, which plays a very good role in preventing moisture. Of course, moisture-proof beads are also indispensable. Then sort them and place them on labels. After sealing, the box must be stored in a dry and ventilated place with partition walls and off the ground, and avoid sunlight. The temperature of the warehouse is best controlled at 23±3℃, 55±10%RH. Under such conditions, PCB boards with surface treatments such as immersion gold, electro-gold, spray tin, and silver plating can generally be stored for 6 months. 3 PCB boards with surface treatment such as tin sink and OSP can generally be stored.