1. Tsy maintsy feno banga

2. Ny isan’ny Birao PCB per stack is limited according to the size is too small

3. Ny mari-pamantarana ny hamafin’ny stack tsirairay ny PE film coating sy ny fitsipika ny sisiny sakany

4. Famaritana fepetra takiana amin’ny sarimihetsika PE sy Air Bubble Sheet

5. Carton lanja famaritana sy ny hafa

6. Misy fitsipika manokana momba ny buffering ve alohan’ny hametrahana ny solaitrabe ao anaty baoritra?

7. Famaritana ny tahan’ny fanoherana aorian’ny famehezana

8. Ny lanjan’ny boaty tsirairay dia voafetra

Amin’izao fotoana izao, ny fonosana hoditra banga ao an-trano dia mitovy, ny fahasamihafana lehibe dia ny faritra miasa mahomby sy ny haavon’ny automation.

fepetra:

a. Ny fampahalalana tsy maintsy soratana ivelan’ny boaty, toy ny “loham-bary am-bava”, laharan’ny fitaovana (P/N), dikan-teny, vanim-potoana, habe, fampahalalana manan-danja, sns. Ary ny teny hoe Made in Taiwan (raha fanondranana).

b. Ampidiro ny mari-pankasitrahana momba ny kalitao, toy ny silaka, ny tatitra momba ny weldability, ny firaketana fitsapana, ary ny tatitra fitsapana sasany takian’ny mpanjifa isan-karazany, ary apetraho amin’ny fomba nofaritan’ny mpanjifa. Ny fonosana dia tsy resaka oniversite. Ny fanaovana izany amin’ny fonao dia hamonjy olana maro tsy tokony hitranga.

The circuit board is no better than other products, and it cannot be in contact with air and water. First of all, the PCB board cannot be damaged by vacuum. A layer of bubble film must be placed on the side of the box when packing. The bubble film has better water absorption, which plays a very good role in preventing moisture. Of course, moisture-proof beads are also indispensable. Then sort them and place them on labels. After sealing, the box must be stored in a dry and ventilated place with partition walls and off the ground, and avoid sunlight. The temperature of the warehouse is best controlled at 23±3℃, 55±10%RH. Under such conditions, PCB boards with surface treatments such as immersion gold, electro-gold, spray tin, and silver plating can generally be stored for 6 months. 3 PCB boards with surface treatment such as tin sink and OSP can generally be stored.