1. Gbọdọ jẹ igbale aba ti

2. The number of PCB ọkọ per stack is limited according to the size is too small

3. Awọn pato ti wiwọ ti akopọ kọọkan ti PE fiimu ti a bo ati awọn ilana ti iwọn ala

4. Awọn ibeere pato fun fiimu PE ati Air Bubble Sheet

5. Awọn pato iwuwo Carton ati awọn omiiran

6. Njẹ awọn ilana pataki eyikeyi wa fun fifipamọ ṣaaju gbigbe ọkọ sinu paali naa?

7. Awọn pato oṣuwọn resistance lẹhin lilẹ

8. Iwọn ti apoti kọọkan jẹ opin

Ni lọwọlọwọ, apoti awọ igbale inu ile jẹ iru, iyatọ akọkọ jẹ agbegbe iṣẹ ti o munadoko nikan ati iwọn adaṣe adaṣe.

Awọn iṣọra:

a. Alaye ti o gbọdọ kọ ni ita apoti, gẹgẹbi “ori alikama ẹnu”, nọmba ohun elo (P / N), ẹya, akoko, opoiye, alaye pataki, bbl Ati awọn ọrọ Ṣe ni Taiwan (ti o ba okeere).

b. So awọn iwe-ẹri didara ti o yẹ, gẹgẹbi awọn ege, awọn ijabọ weldability, awọn igbasilẹ idanwo, ati diẹ ninu awọn ijabọ idanwo ti o nilo nipasẹ awọn alabara lọpọlọpọ, ki o gbe wọn si ọna ti alabara ti ṣalaye. Iṣakojọpọ kii ṣe ibeere ti ile-ẹkọ giga. Ṣiṣe pẹlu ọkan rẹ yoo gba ọpọlọpọ wahala ti ko yẹ ki o ṣẹlẹ.

The circuit board is no better than other products, and it cannot be in contact with air and water. First of all, the PCB board cannot be damaged by vacuum. A layer of bubble film must be placed on the side of the box when packing. The bubble film has better water absorption, which plays a very good role in preventing moisture. Of course, moisture-proof beads are also indispensable. Then sort them and place them on labels. After sealing, the box must be stored in a dry and ventilated place with partition walls and off the ground, and avoid sunlight. The temperature of the warehouse is best controlled at 23±3℃, 55±10%RH. Under such conditions, PCB boards with surface treatments such as immersion gold, electro-gold, spray tin, and silver plating can generally be stored for 6 months. 3 PCB boards with surface treatment such as tin sink and OSP can generally be stored.