1. Kudu vakum dikempalken

2. The number of Papan PCB per stack is limited according to the size is too small

3. Spesifikasi saka sesak saben tumpukan lapisan film PE lan peraturan jembar wates

4. Syarat spesifikasi kanggo film PE lan Lembar Gelembung Udara

5. Spesifikasi bobot karton lan liya-liyane

6. Apa ana angger khusus kanggo buffering sadurunge manggonke Papan nang karton?

7. Spesifikasi tingkat resistance sawise sealing

8. Bobot saben kothak diwatesi

Saiki, kemasan kulit vakum domestik padha, prabédan utama mung wilayah kerja sing efektif lan tingkat otomatisasi.

Kewaspadanan:

a. Informasi sing kudu ditulis ing njaba kothak, kayata “sirah gandum lisan”, nomer materi (P/N), versi, periode, jumlah, informasi penting, etc. Lan tembung Made in Taiwan (yen ekspor).

b. Pasang sertifikat kualitas sing cocog, kayata irisan, laporan weldability, cathetan tes, lan sawetara laporan tes sing dibutuhake dening macem-macem pelanggan, lan pasang ing cara sing ditemtokake dening pelanggan. Packaging ora dadi pitakonan saka universitas. Nindakake kanthi ati bakal nylametake akeh masalah sing ora kudu kedadeyan.

The circuit board is no better than other products, and it cannot be in contact with air and water. First of all, the PCB board cannot be damaged by vacuum. A layer of bubble film must be placed on the side of the box when packing. The bubble film has better water absorption, which plays a very good role in preventing moisture. Of course, moisture-proof beads are also indispensable. Then sort them and place them on labels. After sealing, the box must be stored in a dry and ventilated place with partition walls and off the ground, and avoid sunlight. The temperature of the warehouse is best controlled at 23±3℃, 55±10%RH. Under such conditions, PCB boards with surface treatments such as immersion gold, electro-gold, spray tin, and silver plating can generally be stored for 6 months. 3 PCB boards with surface treatment such as tin sink and OSP can generally be stored.