1. E tlameha ho ba le vacuum packed

2. Palo ea PCB boto per stack is limited according to the size is too small

3. Litlhaloso tsa ho tiea ha stack e ‘ngoe le e’ ngoe ea filimi ea PE le melaoana ea bophara ba margin.

4. Litlhoko tse khethehileng bakeng sa filimi ea PE le Letlapa la Li-bubble tsa Moea

5. Litlhaloso tsa boima ba carton le tse ling

6. Na ho na le melaoana e khethehileng ea ho buffer pele u beha boto ka har’a lebokose?

7. Litlhaloso tsa sekhahla sa ho hanyetsa ka mor’a ho tiisoa

8. Boima ba lebokose ka leng bo lekanyelitsoe

Hajoale, sephutheloana sa letlalo sa vacuum sa lapeng se ts’oana, phapang e kholo ke sebaka se sebetsang se sebetsang le tekanyo ea boits’oaro.

Litlhokomelo:

a. Boitsebiso bo tlamehang ho ngoloa ka ntle ho lebokose, joalo ka “hlooho ea koro ea molomo”, nomoro ea thepa (P / N), phetolelo, nako, bongata, tlhahisoleseding ea bohlokoa, joalo-joalo Le mantsoe a Made in Taiwan (haeba e romeloa).

b. Hokela litifikeiti tsa boleng tse amehang, joalo ka lilae, litlaleho tsa ho cheseha, lirekoto tsa liteko, le litlaleho tse ling tsa liteko tse hlokoang ke bareki ba fapaneng, ‘me u li behe ka tsela e boletsoeng ke moreki. Ho paka ha se taba ea univesithi. Ho e etsa ka pelo ea hau ho tla boloka mathata a mangata a sa lokelang ho etsahala.

The circuit board is no better than other products, and it cannot be in contact with air and water. First of all, the PCB board cannot be damaged by vacuum. A layer of bubble film must be placed on the side of the box when packing. The bubble film has better water absorption, which plays a very good role in preventing moisture. Of course, moisture-proof beads are also indispensable. Then sort them and place them on labels. After sealing, the box must be stored in a dry and ventilated place with partition walls and off the ground, and avoid sunlight. The temperature of the warehouse is best controlled at 23±3℃, 55±10%RH. Under such conditions, PCB boards with surface treatments such as immersion gold, electro-gold, spray tin, and silver plating can generally be stored for 6 months. 3 PCB boards with surface treatment such as tin sink and OSP can generally be stored.