1. Ou dwe chaje vakyòm

2. The number of Komisyon Konsèy PCB per stack is limited according to the size is too small

3. Espesifikasyon yo nan sere nan chak pil nan kouch fim PE ak règleman yo nan lajè a Marge

4. Kondisyon spesifikasyon pou fim PE ak fèy jarèt lè

5. Carton pwa espesifikasyon ak lòt moun

6. Èske gen nenpòt règleman espesyal pou tanpon anvan ou mete tablo a andedan katon an?

7. Espesifikasyon pousantaj rezistans apre sele

8. Pwa chak bwat limite

Kounye a, anbalaj po vakyòm domestik la sanble, diferans prensipal la se sèlman zòn travay efikas ak degre automatisation.

Prekosyon:

a. Enfòmasyon ki dwe ekri deyò bwat la, tankou “tèt ble oral”, nimewo materyèl (P/N), vèsyon, peryòd, kantite, enfòmasyon enpòtan, elatriye ak mo yo Made in Taiwan (si ekspòtasyon).

b. Tache sètifika bon jan kalite ki enpòtan, tankou tranch, rapò soudabilite, dosye tès, ak kèk rapò tès yo mande pa divès kliyan, epi mete yo nan fason kliyan an espesifye. Anbalaj se pa yon kesyon inivèsite a. Fè li ak kè w ap sove anpil pwoblèm ki pa ta dwe rive.

The circuit board is no better than other products, and it cannot be in contact with air and water. First of all, the PCB board cannot be damaged by vacuum. A layer of bubble film must be placed on the side of the box when packing. The bubble film has better water absorption, which plays a very good role in preventing moisture. Of course, moisture-proof beads are also indispensable. Then sort them and place them on labels. After sealing, the box must be stored in a dry and ventilated place with partition walls and off the ground, and avoid sunlight. The temperature of the warehouse is best controlled at 23±3℃, 55±10%RH. Under such conditions, PCB boards with surface treatments such as immersion gold, electro-gold, spray tin, and silver plating can generally be stored for 6 months. 3 PCB boards with surface treatment such as tin sink and OSP can generally be stored.