Tare da sauye -sauye gaba ɗaya da haɓaka masana’antun cikin gida, mutane sun gabatar da buƙatu mafi girma akan ingancin PCB samfurori a cikin kasuwar rarrabuwa ta PCB. Kayan aikin PCB na gargajiya na yau da kullun ana sarrafa shi ta hanyar abun yanka, injin yankan da wuka, wanda ke da rashi ko lessasa kamar ƙura, burr da damuwa. Yana da babban tasiri akan ƙaramin ko allon PCB da aka ɗora da abubuwan haɗin gwiwa, don haka yana da ɗan wahala a sabbin aikace -aikacen.

Aikace-aikacen fasahar laser a cikin yanke PCB yana ba da sabon mafita don sarrafa ƙaramin kwamiti na PCB. Fa’idodin yankan PCB na Laser yana cikin fa’idar ƙaramin yanke yanki, madaidaicin madaidaici, ƙaramin yanki mai zafi, da dai sauransu Idan aka kwatanta da tsarin yanke PCB na al’ada, PCB na yanke laser ba shi da ƙura, babu damuwa, babu burr, da yankewa yana da santsi da tsabta. Amma a halin yanzu Laser yankan PCB kayan aiki bai cika girma ba, yankan PCB na Laser har yanzu yana da gazawa a bayyane.

A halin yanzu, babbar hasara na kayan aikin PCB na laser yana cikin ƙarancin saurin yanke, kauri kayan yankan, ƙananan saurin yankan, da saurin sarrafa kayan daban daban shima yana da wani bambanci, idan aka kwatanta da hanyar sarrafa al’ada, ba zai iya biyan buƙatun manyan samarwa ba. A lokaci guda, farashin kayan aikin kayan aikin laser da kansa yana da girma, kayan aikin PCB na laser yana kusan sau 2-3 farashin kayan aikin injin daskarewa na gargajiya, mafi girman iko, mafi tsada farashin, idan PCB na yankan Laser uku kayan aiki na iya cimma saurin yanke kayan injin PCB, injin sarrafawa da farashin aiki shima zai tashi ƙwarai. Bugu da ƙari, laser yanke kayan kauri kamar MORE fiye da 1mm PCB, ɓangaren giciye zai sami tasirin carbonization, wanda kuma shine dalilin da yasa masana’antun sarrafa PCB da yawa ba za su iya yarda da yanke PCB laser ba.

A cikin kalma, kasuwa na yanzu na kayan aikin PCB na Laser yana da raunin babban farashi da ƙarancin gudu, sakamakon kasuwa bai balaga ba, PCB na wayar hannu kawai, PCB na mota, PCB na likita da sauran manyan buƙatun masana’antun don amfani. Amma tare da ci gaba da ci gaban fasahar laser, haɓaka ƙarfin laser, mafi kyawun ingancin katako, haɓaka tsarin yankewa, kwanciyar hankali na kayan aiki na gaba zai inganta a hankali, farashin kayan aiki zai zama ƙasa da ƙasa, yanke laser na gaba a aikace -aikacen kasuwar PCB yana da daraja. sa ido. Zai zama wani wurin haɓaka masana’antar laser.